
- Cont.power rating RMS/max. power at 2x4 Ohms
measured at 12 V: 2 x 120 Watt
- Cont.power rating RMS/max. power at 2x4 Ohms
measured at 13,8 V: 2 x 150/250 Watt
- Cont.power rating RMS/max. power at 2x2 Ohms
measured at 13,8 V: 1 x 270/450 Watt
- Cont.power rating RMS/max. power at 2x1 Ohms
measured at 13,8 V: 2 x 395/650 Watt
- Cont.power rating RMS/max. power at 1x4 Ohms
bridged: 1 x 540/900 Watt
- Cont.power rating RMS/max. power at 1x2 Ohms
bridged: 2 x 790/1300 Watt
- Adjust Highpass/Lowpass/Bandpass: 15 Hz - 6kHz
- Total harmonic distortion (THD): <>
- Signal to noise ratio: > 100 dB
- Damping factor: > 450
- Frequency range: 20 Hz -20 kHz
- TIM Distortion: <>
- Input sensitivity: 500 mV - 8 V
- Fuse: 4 x 20 A
- Input impedance: 10 kOhm
- Bassboost adjustable: 0 - 9 dB
- Weight net: 4,7 kg
- Driver with class A technology
- Outputstage with 24 MosFet transistors
- RMI (realmixed input) for forming an
optimised mono-summation signal from the left and right channels
- NFI (noisefree input) for distortion-free
listening
- Intelligent active crossover
- Bass Boost Control 0-9 dB, adjustable
center frequencies 30-120 Hz
- Mono/Bridged/ Stereo switch
- 8.0 volt input for connection to any
signal source
- ADC - Anti Distortion Choke to eliminate
distortions
- Intelligent temperature and power controlled
switching power supply
- Separate speaker protection circuit
with current limitation for speaker short-circuiting, cable contact
with car chassis, low impedance and wrong connection
- CPS - Color Protection System
- SMD - Surface Mounting Devices for
constant assembling quality
- Double-sided, extra strong (2x 110u)
and copper plated pc-board for best power and signal transmission
and protection against vibrations
- 24-karat gold-plated solid connectors
suitable for 25 m²/ gauge 4 cables
- Temperature-optimised heatsink for
highest efficiency
- 1% accurate components for perfect
audiophile sound quality and maximum power
- Smoked-grey plexi cover with both
side printing
OUR PRICE: SGD1,350
Back
No comments:
Post a Comment