- Cont.power rating RMS/max. power at 1x4 Ohms
measured at 12 V: 1 x 240 Watt - Cont.power rating RMS/max. power at 1x4 Ohms
measured at 13,8 V: 2 x 300/500 Watt - Cont.power rating RMS/max. power at 1x2 Ohms
measured at 13,8 V: 1 x 540/900 Watt - Cont.power rating RMS/max. power at 1x1 Ohms
measured at 13,8 V: 2 x 790/1300 Watt - Adjust Highpass/Lowpass/Bandpass: 15 Hz - 6kHz
- Total harmonic distortion (THD): <>
- Signal to noise ratio: > 100 dB
- Dampings factor at 4 Ohm adjustable: > 50 to >1500
- Frequency range: 20 Hz -20 kHz
- TIM Distortion: <>
- Input sensitivity: 500 mV - 8 V
- Fuse: 4 x 20 A
- Input impedance: 10 kOhm
- Bassboost adjustable: 0 - 9 dB
- Dimensions (Height/Width/Depth) in mm: 35 x 240 x 432
- Weight net: 4,7 kg
- Driver with class A technology
- Outputstage with 24 MosFet transistors
- Adjustable damping factor from > 50 - 1500
- RMI (realmixed input) for forming an optimised
mono-summation signal from the left and right channels - NFI (noisefree input) for distortion-free listening
- Intelligent active crossover
- Bass Boost Control 0-9 dB, adjustable center frequencies 30-120 Hz
- Mono/Bridged/ Stereo switch
- 8.0 volt input for connection to any signal source
- ADC - Anti Distortion Choke to eliminate distortions
- Intelligent temperature and power controlled
- switching power supply
- Separate speaker protection circuit with current
limitation for speaker short-circuiting, cable contact with
car chassis, low impedance and wrong connection - CPS - Color Protection System
- SMD - Surface Mounting Devices for constant assembling quality
- Double-sided, extra strong (2x 110u) and copper plated
pc-board for best power and signal transmission and
protection against vibrations - 24-karat gold-plated solid connectors suitable for
- 25 m²/ gauge 4 cables
- Temperature-optimised heatsink for highest efficiency
- 1% accurate components for perfect audiophile
- sound quality and maximum power
- Smoked-grey plexi cover with both side printing
Back
No comments:
Post a Comment